Better Drinking Water
Turn-Key Monitoring Solutions for
A simple pre-mounted panel solution for those desiring to measure for Free Chlorine or Chlorine Dioxide.
The full package for Drinking Water Applications. Measure for Ultra-Low Turbidity and Free Chlorine or Chlorine Dioxide with this pre-mounted panel solution.
A simple pre-mounted solution for those desiring to measure for Ultra-Low Turbidity.
EPA 180.1 & 334.0
ISO 7027 & 7393
Watch our launch video
Tech being utilized
Measure for Free Chlorine, pH & Temperature with one robust, smart sensor.
Our EPA Compliant Ultra-Low Turbidity Sensor that utilizes Warm White LED Light Sources.
Our ISO Compliant Ultra-Low Turbidity Sensor that utilizes InfraRed LED Light Sources.
Measure for Chlorine Dioxide, pH & Temperature with one robust, smart sensor.
FR-Series of Flow Reservoirs
Sample calming vessel for dissipation of air bubbles & settling of suspended solids.
UC-Series of Displays
Display & Data Logging Terminal with an Integrated Sensor Calibration Interface.
The Pocket Colorimeter that measures for all common oxidizing
biocides & disinfectants. The perfect panel partner.
The Pocket Colorimeter that measures for all common oxidizing biocides & disinfectants. The perfect panel partner.
Our advanced research and development sensor technologies to achieve highly accurate and stable measurement of Turbidity, Free Chlorine, pH and Temperature.
Our LT-739 (EPA) & LT-739B (ISO) Ultra-Low Resolution Turbidity Sensors offer a detection light source using Warm White LED in 90º surface scatter in accordance with EPA-180.1 standards or InfraRed 860nm in accordance with ISO-7027.1 standards. The sensors are mounted in the unique FR-Series Flow Reservoirs enabling the highest resolution possible of 0.001NTU with UNMATCHED stability. These sensors are simple to calibrate using the LT-SOLID-CAL Solid State Turbidity Calibration Kit (no Formazin needed) or the L-CAL Portable Liquid Turbidity Calibration Kit (uses 500mL of Calibration Solution).
The ST-765SS Series are stainless steel multi-parameter membrane-less sensors based on unique electrochemical principles to determine free chlorine or chlorine dioxide and pH content in water. These sensors incorporate Pyxis Lab® advanced technology in the field of bare-gold electrochemical detection. The ST-765SS-FLC sensor integrates Free Chlorine, plus pH measurement while the ST-765SS-CLO integrates Chlorine Dioxide plus pH measurement. Both can perform temperature and pH compensation for the measurement of Free Chlorine or Chlorine Dioxide based on the conditions present in the application of use. This unique internal compensation results in a highly accurate oxidizer measurement consistent with DPD wet chemistry methodology as high as a pH of 9.0 and is compliant with USEPA-334.0 & ISO-7393 guidelines.
Convenient and simple to install Back-Panel for rapid and easy installation. Truly a plum band power to go platform with intense factory setup, testing and sensor calibration prior to shipment.
30 DAY FREE PANEL TRIAL.
Fill out the contact form below to contact us about trialing any of the DW-Series Panels for 30 days!