ST-772T Tee-Ready Stainless Steel Luminescent Dissolved Oxygen Sensor

Tee-Ready, Stainless Steel Dissolved Oxygen Sensor.

An Optical Luminescent Dissolved Oxygen (DO) Sensor, made of 304 Stainless Steel, that measures at a range of 0.004–20mg/L (ppb) and is meant for inline or bypass installations.

CE Mark 

$1,985.00

Description

The Pyxis Lab® ST-772T tee-ready optical luminescent dissolved oxygen (DO) sensor is based on the principle of ‘Fluorescence Quenching’ to determine dissolved oxygen content in water. This sensor incorporates Pyxis’ advanced technology in the field of fluorescence detection, using Blue/Red Light Detection technology with excitation and reference light sources to offer a wide detection range and extremely low detection limit. The sensor also integrates temperature and pressure sensors to perform compensation for the measurement of dissolved oxygen based on ambient environmental conditions.

The ST-772T offers an easily replaceable, front loading DO membrane cap that has been independently developed by Pyxis Lab® with a typical service life of up to 2 years. This unique DO membrane cap design incorporates a black microporous PTFE membrane material designed to provide extreme scratch resistance, extended life span and simple replacement. The flat front-end design of the ST-772T makes this platform less prone to contamination or fouling and is very easy to clean.

The sensor body is composed of 304 stainless steel and is well suited for aggressive industrial application use. The ST-772T (304SS) should be utilized in an inline tee or bypass flow installation. The ST-772T series offers both 4-20mA and RS-485 Modbus outputs and is Bluetooth® enabled when used in conjunction with the MA-CR Bluetooth Adapter.

Features

  • 0.004–20mg/L Measurement Range
  • No Membrane Replacement or Electrolyte Replacement
  • Simple DO Cartridge Replacement every 2 Years
  • Built-In Temperature & Pressure Sensor with Automatic Compensation
  • Accurate and Stable Measurement with Ultra-Low Drift Requiring No Calibration for up to 2 Years
  • Built-In Transmitter without Preamplifier or Meter Head
  • Dual Outputs both 4–20mA Isolated Signal & RS-485 Modbus
  • Wireless Calibration, Diagnostics, Data Trend via uPyxis® app when used with MA-CR Bluetooth® Adapter
  • Slope Calibration with Air or Air Saturated Water / Zero Calibrate with 5% Sulfite Solution or Nitrogen Gas
  • Submersible (ST-772 or ST-772P) or Inline Pipe Tee (ST-772T or ST-772T-P) Installation Versions Available

Typical Applications

  • Activated Sludge
  • Aeration Basin
  • Nutrient Removal
  • Wastewater
  • Sewage Processing
  • Chemical/Process Water Applications
  • Domestic/Drinking Water Applications
  • Filtration Applications
  • Aquaculture
  • Agriculture
  • Compliant USEPA 40CFR Part 136.3 as an Approved Method for Measurement of Dissolved Oxygen in Wastewater, Drinking Water and Direct Discharge

Specifications

Item ST-772-T
Part Number 53719
Body Material 304 Stainless Steel
Installation Bypass/Inline Installation
DO Measuring Range 0.004mg/L or 0-200% Saturation or 0-500mbarP02
Temperature Measuring Range 32-122 °F (0-50 °C)
±0.2% of Value
Resolution 0.01mg/L
Accuracy ±0.1mg/L or ±1%, Whichever is Greater
Light Source Blue Light Irradiated Emission
Red Light Quenching Excitation
Response Time <60 Seconds
Operational Temperature 0-45 °C (32-113 °F)
Operational Voltage 22-26VDC, Power 0.6W
Signal Output (2) 4-20mA Analog
RS-485 Digital
Dimension (LxD) 296×33.6mm (11.65×1.32in)
Weight 760g (1.67lb) Cable Excluded
Working Pressure 145psi
Wet Material 304SS/Polycarbonate
Cables Provided 4.9ft (1.5m) Flying Lead Cable – 8Pin
4.9ft (1.5m) Bulkhead Cable – 8Pin
Calibration Slope Calibration: Air or Air Saturated Water
Zero Calibration: 5% Sodium Sulfite or Nitrogen Gas
DO Membrane Cap Life 2 Years
Protection Grade IP67/IP68
Regulation CE / RoHS
Compliance USEPA 40CFR Part 136.3

 

Support Documents

ST-772 Series User Manual V1.09

ST-772 Series Data Sheet

Videos

Reviews

There are no reviews yet.

Be the first to review “ST-772T Tee-Ready Stainless Steel Luminescent Dissolved Oxygen Sensor”

Your email address will not be published. Required fields are marked *

Shopping Cart
Scroll to Top